"For Open-Hearth Steel, the makers shall furnish the Inspectors with
a complete chemical analysis of the elements specified in section 2
hereof for each melt.
"(_c_) On request of the Inspector, the Manufacturer shall furnish
drillings from the test ingot for check analysis.
"(_d_) All tests and inspections shall be made at the place of
manufacture, prior to shipment, and shall be so conducted as not to
unnecessarily interfere with the operation of the mill."
FOOTNOTES:
[Footnote A: Presented to the Annual Convention, June 21st, 1910.]
[Footnote B: These reports were published in _Proceedings_, Am. Soc.
C. E., as follows: February, 1903, p. 43; February, 1905, p. 60:
February, 1906, p. 50; February, 1907, p. 69; August, 1907, p. 290;
February, 1908, p. 85; February, 1909, p. 61; February, 1910, p. 62.]
[Footnote C: Bulletin No. 118, December, 1909.]
[Footnote D: Bulletin No. 118. December, 1909.]
[Footnote E: Reprinted from _Supplement to Bulletin No.
Pages:
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34